Aquarium Weight Calculator

A set-up glass aquarium weighs roughly 10 pounds per gallon: water is 8.34 lb per gallon, plus glass and gravel. That puts a 55-gallon tank near 550 lb and a 75-gallon near 800 lb. Enter your dimensions below for your tank's total and the load on your floor.

Updated 2026 · free, no sign-up

Tip: a sturdy, level stand rated for the weight is essential. See stand picks →

How Much Does a Fish Tank Weigh? Chart

A filled glass aquarium weighs roughly 10 pounds per gallon, so a 55-gallon tank comes to about 570 pounds and a 75-gallon to about 790 pounds.

Filled weight of common glass tanks, from this calculator: water at 90 percent of volume (8.34 lb per gallon), 2 inches of gravel and an estimated empty glass weight. Rock and stands are extra.

TankSize (L x W x H)Water onlyFilled total
10 gallon20 x 10 x 12 in78 lb114 lb
20 long30 x 12 x 12 in140 lb205 lb
29 gallon30 x 12 x 18 in211 lb287 lb
40 breeder36 x 18 x 16 in337 lb468 lb
55 gallon48 x 13 x 21 in426 lb569 lb
75 gallon48 x 18 x 21 in590 lb788 lb
125 gallon72 x 18 x 21 in884 lb1,182 lb

Sources: water weight 8.34 lb per US gallon (USGS); empty glass weight estimated at about 1.25 lb per gallon, in line with published standard tank weights; gravel at about 100 lb per cubic foot. Researched from published data, not professional advice. Updated 2026.

Why Filled Tank Weight Matters

Water is deceptively heavy. At 8.34 pounds per gallon, the water in a mid-size tank weighs more than most furniture, and substrate and rock add hundreds more pounds. A filled 75-gallon aquarium with stand can exceed 900 pounds concentrated over a few square feet, which is why knowing the total, and the load per square foot, matters before you set up.

Reading the Floor Load

Residential floors are generally designed for about 40 pounds per square foot of live load. The load figure above divides your total weight by the tank footprint. If it is well under 40, you are fine on most floors. If it approaches or exceeds that, place the tank against a load-bearing wall, orient it across the joists, and consider having the floor evaluated, especially upstairs or on older construction.

Frequently Asked Questions

How much does a 55 gallon fish tank weigh?

About 550 to 600 pounds set up. The water alone is roughly 410 to 460 pounds, and the glass, 2 inches of gravel and decor add the rest. Empty, a standard 55-gallon glass tank weighs roughly 70 to 80 pounds.

How much does a 60 gallon fish tank weigh?

Roughly 600 to 650 pounds once filled with water, substrate and decor, using the rule of thumb of about 10 pounds per gallon. Use the calculator with your tank's exact dimensions for a closer figure.

How much does a filled aquarium weigh?

Water alone weighs 8.34 pounds per US gallon, so the water in a 55-gallon tank weighs about 459 pounds. Add the tank, stand, substrate, rocks, and equipment and the total climbs higher. As a quick planning rule, a glass freshwater setup works out to roughly 10 pounds per gallon fully loaded, so a 55-gallon comes in around 550 to 600 pounds and a 75-gallon can top 850 pounds.

Can my floor hold a fish tank?

Most residential floors are engineered for about 40 pounds per square foot of live load. Small and medium tanks up to roughly 55 gallons are fine almost anywhere. Larger tanks, 75 gallons and up, should ideally sit against a load-bearing wall and run perpendicular across the floor joists to spread the load. For very large tanks, 125 gallons or more, it is worth having the floor evaluated.

Which way should a large tank sit relative to floor joists?

Position a large tank so its length runs across (perpendicular to) the joists rather than parallel with a single joist. This spreads the weight over several joists instead of loading one. Placing the tank against an exterior or load-bearing wall, where joists are best supported, is safer than the middle of a long span.

How much does aquarium substrate weigh?

Gravel and sand are heavy. Aquarium gravel runs about 90 to 100 pounds per cubic foot and sand is similar or slightly heavier. A common guideline is roughly 1 to 1.5 pounds of substrate per gallon for a normal depth, but a deep planted substrate bed can be much more. This calculator estimates substrate weight from your actual footprint and depth.

Does the stand weight matter too?

Yes. A solid wood or steel stand can add 50 to 150 pounds on its own, and that load sits on the same floor area. When checking whether a floor can handle a tank, include the stand, the tank, all the water, substrate, rock, and equipment together, then compare the total against the floor area it covers.